Tuesday, October 23, 2012

Tuesday Tip

How to avoid seeing chips on the finish side of your material.  

Simply turn your material over and cut from the back side.  As a circular saw cuts it cuts from under the material to the top.  If you have your material with the finished side down the resulting cut will be chip free on the finish side of your material.  One caution, make sure you protect the finish side of the board you are going to cut.  Put something down to prevent scratching or marring the surface during cutting.
See a related post as it relates to cutting straight lines here.

No comments:

Post a Comment

Thank you for your comments! If you have a question and your blogger profile is NOT linked to your email address, then I'll answer your question here in the comment section. Thanks!